|
| |
- WMCS Product Chart
-
- An overview of WMCS products is shown in one scheme. All products operate either in the GSM band or in the ISM band, or support both bands.
-
- M100 Series
-
- The M100 series of GSM/GPRS modems are end-user prepared wireless modems supporting the three main GSM network frequencies (GSM-900, DCS-1800, and PCS-1900).
The M101/M110 also includes an integrated GPS module and on-board processor.
-
- A100 - Handheld Alarm Monitor
-
- A handy handheld Alarm Monitor that can detect up to 4 alarms from remote sensors (see also S100-series). Included is a Panic button and a Sensor Select and remote
Sensor ON/Off button. This unit is to be used in a closed-circuit configuration or can also be integrated in a more sophisticated wireless model.
- H100 - Handheld
Data Monitor
-
- A handy handheld Monitor device that can
send/receive data and can detect alarms from remote sensors (see also S100-series). Included is a Panic button and a Sensor Select and remote
Sensor ON/Off button. This unit is to be used in a closed-circuit configuration or can also be integrated in a more sophisticated wireless model.
-
- S100 Series - Wireless Sensors
-
- A series of high-quality wireless sensors operating in the ISM band (915/868 MHz) using a two-way protocol. Each sensor is designed to operate in a stand-alone
mode (batteries) or in an externally powered mode. Different type of sensors are standard available.
-
- LP100 - Ultra Low Power Stand-Alone Module
-
- This low power consuming module is especially developed for remote watchdog application. Using batteries only, it is capable to run continuously during minimal
18 months. The core of the system exists in an ultra low power processor, combined with a specific short and long distance communication protocol.
-
- Software Modules
-
- Several software modules are written to support the WMCS hardware for adjusting and configuring user-specific parameters and data management.
|
