Tri-band GPRS / GPS modem unit with embedded TCP, designed
for AVL and Stand-Alone M2M Applications
Release Date: Wednesday, February 26, 2003
Company: BCR bvba
Category: Press
Releases : Industry News (Market)
Summary:
The latest products launched by WMCS,
M100 and M110G are claimed to be the state-of-the art
GSM-GPRS-GPS and GSM-GPRS with embedded Internet Protocol,
with a Triple Mode 900-1800-1900 may function throughout the
world in Telematics.
Designed, developed and
manufactured by WMCS, with the worldwide marketing rights
under M110 and M110G awarded to BCR distributorship, Fleet and
Fixed Asset applications will have the most advanced
technology to contend with.
Full Text:
WMCS has launced two new GPRS Modems,
with a wide range of functions, which are expected to
revolutionalize the current Telematics
market.
Developed and manufactured by WMCS, M110G,
GSM-GPRS-GPS and M110 GSM-GPRS bring GPRS packet switching
technology with Internet Protocol within GSM to provide
tremendous benefits to GSM network operators. Both M110 and
M110G are available enclosed in a
Black Box measuring 132mm
x 65mm x 26mm (L x W x H) are available immediately for
worldwide distribution.
Customised board lay-out is
negotiatable
The tiny M110 & M110G module which
sits comfortably inside a packet of cigarettes allows the
introduction of value added services for market
differentiation and enables connection to a wide range of
public and private data networks using industry standard data
and Internet Protocols.
The applications cover Fleet
Management and Security functions to Logistical and Management
functions of Gaming and Vending machines, Security functions
of homes, offices and factories. Connectability to a whole
array of peripheral devices turns M110 & M110G into a
vital component of daily functions.
By upgrading the
networks to GPRS, existing GSM operators will have third
generation capability which will reduce the eventual
investment needed to transition to 3G.
The M100 &
M110 comes with a embedded software and configuration Console
to set GPRS, GPS, Alarm, SMS, and Sensor settings demanded by
numerous possible applications.
All settings can be adapted
over the GPRS network from the Remote Server or by
SMS.
Also, here, customised embedded software is
negotiateble.
The applications for M110 &
M110G include-;
*Telemetry Market
*Automotive GSM
Module
*Hand Held Terminals
*EPOS
*Will
Terminals
*Monitoring & Safety
FEATURES OF M110
& M110G Modems
General Specification
*Fixed baud
rate configurable to match terminal equipment
speed.
*Simple programming with standard AT commands (Hayes
commands)
*Configurable data forwarding character or
timeout.
*Configurable host IP address and port number
(GPRS only).
*Auto connect on DTR or by AT
command.
*Data transfer by UDP for minimum latency and data
overhead.
*Auto reconnect after connection drop.
*Host
end (ON/OFF) control of auto forwarding
*Optional auto
identify header for units with dynamic IP (GPRS only)
*All
settings non-volatile
Technical
Specifications
*GSM/GPRS supports 900/1800/1900 MHz
systems
*Power requirements 8 -12 VDC
unregulated
*Board size 122mm x 59 mm (L x
W)
*Enclosure size 132 mm x 65 mm x 26 mm (L x W x
H)
*Antenna connector(s) SMA
*DB9 RS232
connector(s) to connect to terminal equipment
*RJ-45
connector for peripheral devices
*Industrial and/or
standard adapter power connector
Two types of modems
are available:
1: GPRS/GSM Stand-Alone Triband
Modem - M110
This compact and complete GPRS modem
includes an on-board processor. Two I/O pins can be used to
control external events, Four I/O pins can be used to monitor
external events. This configuration serves any stand-alone
applications where fast data transfer and event control is
needed.
Applications include Telemetry Market,
Automotive GSM Module, Hand Held Terminals, Wireless
Terminals, Monitoring/Safety, Point Of Sales.
2:
GPRS/GSM/GPS StandAlone Triband Modem - M110G
This
compact and complete GPRS modem also includes an integrated
GPS module and an on-board processor. Four I/O pins can be
used to control or monitor external events. This configuration
serves any stand-alone applications where fast data transfer,
global positioning, and event control is
needed.
Applications include Telemetry Market,
Automotive GSM Module, Hand Held Terminals, EPOS, Wireless
Terminals, Monitoring/Safety, Point Of Sales.
Additional
specifications available on request.
Both units, M110
& M110G also can be used in 'transparant' mode with a
laptop or pda connected to the serial port
Back
Contact:
For further details please
contact
mailto:info@bcr.be
Willy
Robberechts
Phone +32 16 8967 97
Mobile + 32 477 962
393
BCR bvba
Pakenstraat,9/0201
B-3001
Heverlee
http://www.bcr.be/
Back
|
